Polaris Slingshot Forum banner

1 - 9 of 9 Posts

·
Vendor
Joined
·
550 Posts
Discussion Starter #1
Had to take a min away from setting up for the show to grab a photo of a few of my staff members and I with the slingshot on display at Snowmobile USA... :)



ImageUploadedByTapatalk1415323114.816936.jpg
 

·
Vendor
Joined
·
550 Posts
Discussion Starter #3
Most recent update, 2 of my guys were working on the first ever slingshot hot wire :p
 

·
Registered
Joined
·
2,225 Posts
Thanks Chris...Love the picture!

One question... Is the hood A single piece or is it Several pieces put together on a frame? It appears that the black striping is actually different pieces than the red.
 

·
Registered
Joined
·
532 Posts
Painter
I've been studying the hood photos.
It appears to be a 3 piece design.
Not sure how hard it'll be taking apart. On some of the pictures there is a seam for each fender
Remember someone stating it would be hard to take apart then put back together right.
Myself I think it'll be doable. Should
beable to find out from someone at the show.
 

·
Registered
Joined
·
2,225 Posts
Painter
I've been studying the hood photos.
It appears to be a 3 piece design.
Not sure how hard it'll be taking apart. On some of the pictures there is a seam for each fender
Remember someone stating it would be hard to take apart then put back together right.
Myself I think it'll be doable. Should
beable to find out from someone at the show.
Painters want to know!
 
1 - 9 of 9 Posts
Top