Polaris Slingshot Forum banner

1 - 19 of 19 Posts

·
Vendor
Joined
·
639 Posts
Discussion Starter #1
We are really excited to release our latest forced induction kit for the Polaris Slingshot, our Stage 1 kit!

DDMWorks Stage 1 turbo 1.jpg

This kit is designed to give a lot of performance for the most affordable price. We worked a lot on making sure this kit was going to be easy to install, provide a big punch of power and also be customizable to your Slingshot.


Slingshot Turbo Kit by DDMWorks


Some key features of the Stage 1 kit include -


- Custom DDMWorks 2871 Turbo

- Easy 6-7psi of boost producing 270HP at the rear tire (depending on exhaust options).

- Internally wastegated turbo using genuine Borg Warner boost actuator.

- Multiple exhaust Options ranging from our DDMworks shorty exhaust (2.5" front exit in stock location) Welter rear dual or rear sidekick exhaust!

- Mandrel bent aluminum tubes with smooth bends (no weld marks) for the best airflow, power and aesthetics.

- Custom DDMWorks intercooler and mount specifically designed for the Slingshot.

- Color options!! the charge tubes can be done in the standard black or red. For an additional charge we can offer you full custom Slingshot powdercoat colors to match your ride.

- Plug and play 2 Bar MAP sensor for accurate fueling with MAP clip included.

- Upgraded NGK spark plugs that are 1 step colder.

- Water cooled turbo with Stainless braided hoses and AN fittings (no rubber hoses).

- Stainless braided oil drain line and oil supply to the turbo (no rubber hoses).

- DDMWorks Turbo tune included in the price of the kit, designed to run on 91 octane or better.

- Online, phone and text tech support available for questions when ordering or during installation.

- No additional engine internal parts needed for install, the kit includes everything you need.

- Kit will be available from all of our dealers including Slingmods, Slingshotonly, etc.

- ECM's can be sent to our location in South Carolina for flashing or to California, whichever is more convenient for you.

- We can install this kit at any event we attend, and have the ability to flash the ECM on site!

- We can supply a new oil pan with welded in oil drain fitting and oil pan gasket to make installation easier.


The base kit price in Black or Red powdercoat, 2.5" race exhaust, everything needed for full install is $2995


First batch of kits will be shipping the week of July 8th.


Slingshot Turbo Kit by DDMWorks


If you are going to be at Homecoming this week, stop by, we are doing another install while we are there!


Any questions? Just let us know!

Dave

DDMWorks Stage 1 Turbo Kit 270HP.jpg


DDMWorks Stage 1 Install at Maggie Valley.jpg


DDMWorks Stage 1 turbo Unicorn Madness Powdercoat.JPG
 

·
Registered
Joined
·
47 Posts
Great pricing! Wish I would have known about this a month ago when I purchased my ZZP kit.
 

·
Registered
Joined
·
683 Posts
I rode with Dave in a sling with this stage 1 at Huntsville, it's definitely fast as hell! I think he has it set to do 8 psi on boost, safe for the stock motor.
 

·
Registered
Joined
·
683 Posts
Oh, my bad, I misread that gauge you were holding, was still fun!

What's 1 psi between friends?
 

·
Registered
Joined
·
683 Posts
As far as pics, it's the same as his stage two that has been out for a year or three. Lots of reviews and tons of happy customers with his stage 2 setup. The stage 1 is just not quite as powerful and is cheaper.

I watched him install one, installs the same as the stage 2 that he put in mine. Road in it with him, lots of smiles even at the modest boost it creates.

I went with the stage 2 before he announced the 1, but I probably would have went ahead with the 2, knowing I could push higher in the long run. I'm very happy with my stage 2, and I'm only at 6 psi right now.
 

·
Vendor
Joined
·
639 Posts
Discussion Starter #12
Guess not...........................
Most of the first kits were just being installed last week and the ECM's are just getting back to the owners on the first batch that shipped. We have another batch of turbo's that just came in that are shipping also this week, so in the coming weeks there will start to be a lot of these out there and might get some more feedback at that point.

Hope that helps,
Dave
 

·
Registered
Joined
·
92 Posts
Most of the first kits were just being installed last week and the ECM's are just getting back to the owners on the first batch that shipped. We have another batch of turbo's that just came in that are shipping also this week, so in the coming weeks there will start to be a lot of these out there and might get some more feedback at that point.

Hope that helps,
Dave


Hope to hear soon , thanks Dave
 

·
Registered
Joined
·
683 Posts
I don't think I had a pic of it while it was installed, but this is their shorty exahust



It's got a nice deep rumble to it, a bit louder than the stock and plenty of flow for whatever boost you want to throw at it
 

·
Registered
Joined
·
92 Posts
I don't think I had a pic of it while it was installed, but this is their shorty exahust


It's got a nice deep rumble to it, a bit louder than the stock and plenty of flow for whatever boost you want to throw at it


Thanks Wokka, do you have the kit installed? could you give a review and possible more pics? Thanks
 

·
Registered
Joined
·
683 Posts
I have the Stage 2 installed. Everything but the turbo and tune are the same. The stage 2 spins up faster and is more responsive.

I think they look the same or very similar. Again, these are the stage 2 pics. If you want more specific images of any part, let me know.





 
1 - 19 of 19 Posts
Top