Polaris Slingshot Forum banner
1 - 4 of 4 Posts

·
Vendor
Joined
·
648 Posts
Discussion Starter · #1 ·
The DDMWorks billet windshield mount is designed to be the ultimate windshield mount for the Polaris Slingshot, and offers many unique features not found together on any other windshield mount available.

Retail price is $95 - available here - Polaris Slingshot Windshield Mount by DDMWorks

Special Cyber Turkey Sale Price through 11-28-16 - $65


The DDMWorks windshield mount is the first aftermarket mount constructed from a single solid piece of aluminum, not 2 smaller pieces bolted together. This means we were able to create a stronger mount that allows multiple different wiring routing options. The multiple wiring routing options keep wires for all your devices neatly tucked away. The one piece constrution also allowed us to hide all of the mounting hardware giving a more custom, clean appearance when installed. The mount offers a total of 8 usable mounting locations on the mount, 2 in the stock location facing the driver and 3 on each side of the mount. The side mounts offer some mount holes closer to the driver and some further away from the driver to allow you to install devices where they are easiest to use. Also included with our windshield mount is a new stainless steel support plate for under the dash, which makes for the most solid mount available. New stainless steel hardware is also included to make sure that those Slingshots that are driven in all weather conditions will never have a problem with hardware rusting.




  • Solid 1 piece CNC Billet Aluminum
  • Unique multiple cable routing paths
  • Hidden mounting bolts
  • 8 mounting locations
  • Available in Black, Red and Blue
  • Stainless steel mount plate and hardware


 

·
Registered
Joined
·
4,124 Posts
Looks good.

I'm really hoping one of vendors makes an extension piece for the end with a rubber bumper that will press against to new style ripper windscreens.

My OCD kills me that my OEM brace doesn't reach. And, the new ripper shake a lot more with no center brace touching.
 

·
Vendor
Joined
·
648 Posts
Discussion Starter · #3 ·
Looks good.

I'm really hoping one of vendors makes an extension piece for the end with a rubber bumper that will press against to new style ripper windscreens.

My OCD kills me that my OEM brace doesn't reach. And, the new ripper shake a lot more with no center brace touching.
Shoot me an email about that and what we talked about the other night, we should be able to make a simple piece that will make that work. We can 3D print a sample and send it out with the other goodies we are sending you.

Talk with you soon,
Dave
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top