Polaris Slingshot Forum banner

MY BUILD 16 SS

3079 Views 14 Replies 5 Participants Last post by  rrherna
8
Started working on my SS.

I not a professional but a hobbyist when working on my Slingshot, so please bear with me...

I decided that I was going to add a separate fuse box, relays and power/negative blocks to run my accessories.

Im adding the following:

-Radio

-2 Gauges:
  • Water Temp
  • Oil Pressure
-RGB LED Lights:
  • 3 wheel kits - which I'm building my self - no need to spend the 350 plus for them
  • 4 strips under the SS
  • 2 smaller strips under the dash and glove box
  • Light Pack also allows for all led lights go to go Red when 12 volts applied in addition to the multi patterns - requires a relay to convert negative output to positive output for 12 volt trigger
-Wireless relay for remote starter kill

-12 volt blinking light

Here my schematic :





Image of the radio and install:





Gauge install





RGB LED lights




See less See more
  • Like
Reactions: 2
1 - 10 of 15 Posts
Nice. I love a good build thread. Seeing it take shape is half the fun. :woot:

Welcome to the forum and the SS modding madness.
Thank you...i will keep posting updates..
3
Just finished the gauges:






Half way done with the LED light
See less See more
  • Like
Reactions: 2
10
Added the following today:










See less See more
  • Like
Reactions: 1
All that nice work but leaving the crappy stock pods and speakers? o_O
That will be the next project....looking at what type of setup i want to build...
  • Like
Reactions: 2
Added the wireless starter disable.

  • Like
Reactions: 1
Replaced the micro brake switch today...magnetic one went bad
See less See more
  • Like
Reactions: 1
2
Working on building and installing the wheel LEDs today...
See less See more
  • Like
Reactions: 1
  • Like
Reactions: 1
Is there a plug and play harness for the gauges to get the read outs?
No...have to splice for power, both ACC/Constant and ground. Then connect the wire to the sensor..
1 - 10 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top