Polaris Slingshot Forum banner

21 - 25 of 25 Posts

·
Registered
Joined
·
2,691 Posts
Just loosen the panel and pull it back a little and see if still metal support under there. If so, Just add a piece of rubber on top and you'll be good to go.
We have also changed the way that we enter/egress The Grasshopper so not to put any weight on the arm..............

Bill and Justina
 

·
Registered
Joined
·
2,741 Posts
From the underneath side I'm not so much liking what I see!
Looks like something mfg. straight out of China. Weaker- light duty- crappy welds - less bars throughout etc.
IMHO I feel as if they sacrificed some strength and integrity of the vehicle in order to save weight just to be able to Sell the roof
But they're pretty on the outside !!!
i agree with Jeff
have seen the bottom of a 2017 on his lift
and it sure does look weaker
WEAKER.jpg

.................................................. tom n carol
 

·
Registered
Joined
·
59 Posts
2017 vs 2016 rear light (strip) mod. The adapter may not work on the 2017's and blow the "NEWLY ADDED" module in the rear. 2016's don't have this mod and the 2017's do. Believe rear lights, af/fm antenna, camera is now routed through this vs the 2016. If you have pictures of the difference, please post so new 2017 owners are aware of this change.
 
21 - 25 of 25 Posts
Top