Polaris Slingshot Forum banner
1 - 2 of 2 Posts

· Registered
25 Posts
Discussion Starter · #1 · (Edited)
Always wanted to punch out the grill a little so today I did!

1) One can of automotive paint - pick your color.
2) Pop the hood and take out the two screws on the grill cover on the left and right hand side of the grill. Take them out from the inside of the engine compartment or you can lie down and reach up under the grill and remove them from there.
3) Pull out the plastic grill - wash off really well - dry and tape off the sides with frog
tape. ( Thought of perhaps doing a Y tape pattern in the center but just painted the whole thing instead)
4) Spray 2-3 coats of paint - let dry.
5) Install your new grill cover!
6) Or buy OEM fo100$... just sayin'

CHEEP mod with way cool results! Before and after pictures but today was a cloudy day in Southern California so pictures not all that great.


1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.